Here is the tutorial on how to make an ‘old book cover’ journal, it'
s my first tutorial, so I hope it’s ok and easy to follow. Any comments welcome! Also, if anyone actually makes one, I'd love to see it!
1. Find an old book with an interesting cover, a good size (I like small ones!), and one that has damaged, yellowed pages (it will make you feel better about taking it apart!)
2. Carefully cut the page block away from the cover. Decide first whether you’d like to keep the end papers (sometimes old books have gorgeously patterned endpapers … this one didn’t though)
3. To neaten the bare spine, measure and cut some paper to cover it. I used a page from the book, which is the perfect height, but it was very brittle so I had to be careful it didn’t rip. The size of the spine cover should be the height of the book page and about 25mm wider than the spine.
4. To make the pages for your book, measure one of the old book’s pages and take 5mm off the side and top measurements. Decide on the number of pages and the type of paper you want and cut your pages to size. (Don’t make your stack of pages too thick, otherwise it will be
very difficult to sew up – mine was 4 – 5 mm thick)
5. Sew up your pages using the Japanese Stab Binding method. There’s a great little explanation of how to do it
here. Bundle your pages with heavier paper on the top and bottom and attach with bulldog clips so they don’t move while you’re sewing it up. You can use an awl or a very strong needle to make your holes (and having an old phone book underneath will save the table from lots of little holes!). The thread I used was stranded cotton that I ran through a candle to wax it. Waxed thread works heaps better.
6. Glue your sewn book block to the book cover. Use PVA glue and weigh it down with a heavy book once you’ve attached it to the book cover.
7. If you’d like to, you can create a little pencil holder to run down the spine. I used a thick-ish piece of paper. The dimensions of the paper should be about 50mm wide and as long as it needs to be, mine was 115mm. Fold back about 15mm on each side, glue each surface and then glue to spine. I found it easier to have the pencil in while I was gluing so that it kept the right shape.
7a. Alternatively, you could make a little paper ‘tab’ to glue in the spine, and then attach a map etc. to it (like in my
NZ travel journal).
8. Choose some paper to make your ‘ephemera pocket’ out of. Again, I used one of the old book’s pages, but glued it to another stronger piece of paper. (I loved the chapter title at the top of the page, "Seth Washes a Handkerchief" so I had to use it!!)
Cut your paper to size, mine was 100 x 110mm, so that it fits nicely in the cover. Fold under 10 – 15mm on the sides and bottom and snip out the corners. Glue to the cover. Squash this bit under a heavy book too.
9. Your book’s done! You might like to lacquer or wax the outside of the cover to protect it more. Now you’re ready to write your travel journal, jot down your thoughts, or place your book by the phone for those important phone doodles or messages!
Also this week, I found out that my book tutorial is listed on the Meet Me At Mikes list of '25 ways to make a book by hand' - cool! (mine's #16). This list is a great compilation of some lovely little tutorials for making gorgeous books. (great ideas for doing some crafting these holidays with the kidlets).
